W6-600DS Under-Drive Lifting AMR with 600 kg Payl | RFQ Sourcing Details
Factory Automation Planning · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Factory Automation Planning. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The W6-600DS is an under-drive lifting autonomous lifting stroke, and transports loads weighing up to 600 kg. The electric, double-wheel differential-drive platform measures 1276 × 540 × 360 mm with its bumper strip installed. Navigation uses dual-LiDAR SLAM with inertial guidance for positioning correction.
The stated repeat positioning accuracy is ±10 mm and angular accuracy is ±1° when the scanned environment remains relatively stable and the robot approaches the target from a fixed direction. These figures apply to target-point repeatability;repeatability of the complete travel path is not guaranteed.
Adjustable operating speed is specified at up to 1.2 m/s. The robot has a 48 V, 30 Ah lithium iron phosphate battery with a stated endurance time of 8 hours. Charging from 10% to 80% is specified at no more than one hour. Automatic and manual charging are available when an appropriate charger is used.
The stated battery service life is 1,500 cycles while retaining more than 80% capacity. Standard functions include map and model editing, positioning and navigation, differential motion control, an API interface, Wi-Fi roaming, automatic charging, and shelf recognition.
Fleet scheduling allows operators to review robot status, battery level, and location through the control system. Listed safety provisions include two LiDAR units, a bumper strip, emergency-stop switches, a speaker, and ambient lighting.
This IP20 model is intended for indoor transport on smooth, clean surfaces without significant undulations. Its stated passability limits are a slope of up to 5%, a 5 mm step, and a 30 mm gap. The robot should cross ramps, steps, or gaps quickly and perpendicularly rather than stopping or turning on them.
The specified operating environment is 0–50°C and 10–90% relative humidity without condensation. Before procurement, buyers should confirm the load carrier’s underside geometry, lifting interface, center of gravity, and stability with the 60 mm lifting range.
The operating layout should also be reviewed for aisle width, turning clearance, floor condition, wireless coverage, traffic controls, and charging-station placement.
Confirm which charger, fleet-control components, API documentation, optional QR-code positioning, installation services, and customized features are included in the proposed configuration. A site-specific safety and integration assessment remains necessary before deployment.
W6-600DS | Applications and Buyer Notes
W6-600DS is organized as a sourcing-ready Factory Automation Planning reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-t
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Factory Automation PlanningBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- W6-600DSBased on visible page data; confirm exact value in the RFQ.
- Battery
- 48 V, 30 Ah lithium iron phosphateBased on visible page data; confirm exact value in the RFQ.
- Network
- Ethernet and Wi-Fi 802.11 a/b/g/n/acBased on visible page data; confirm exact value in the RFQ.
- Navigation
- Dual-LiDAR SLAMBased on visible page data; confirm exact value in the RFQ.
- Robot type
- Under-drive lifting autonomousBased on visible page data; confirm exact value in the RFQ.
- Drive system
- Double-wheel differential driveBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Mes Scada And Digital Manufacturing categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Smart Factory Integration categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Product CategoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 126inch Lathe Length 1100kn 110ton Pressure Dual Electric Hydraulic Sheet Bender MachineThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1mm Mm Metal Cutting Machine Laser Cutter Iron Cutter 1500w 3kwThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1500w Air Cooling Handheld Semi Auto Fiber Laser Welding Machine For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 24kv Metal Clad Common Tank Gas Insulated Switch CabinetThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 5 Ton Per Hour Complete Maize Milling Line Turnkey ProjectThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Abuk 2023 Ce Rohs Eu Uk Glass Board 86mm 1 2 3 4 Gang 300w Low Power Electronic Wall Touch Light SwiThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Smart Factory Integration categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2026 6 Axis Welding Robot Arm Collaborative Robotic Arm 3kg 5kg 10kg Welding Cobot Robot ArmThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path KnowledgeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path AboutThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Wellwit W5-300DL 300 kg Under-Drive Lifting AMR with Dual-LiDAR SLAMRequest Quote
Automatic Apple Peeling and Coring Machine with Two- or Four-Station ConfigurationRequest Quote
Customizable Floor-Type Pallet Elevator for Warehouse Automation, 1500 kg Max PayloadRequest Quote
Dynamic DWS Parcel Dimensioning, Weighing and Barcode Scanning SystemRequest Quote
FUJI NXTR Modular High-Precision SMT Chip MounterRequest Quote
XL-21 630A Automatic Transfer Switch Control Cabinet for Dual-Power DistributionRequest QuoteSmart Manufacturing related sourcing paths
Smart Manufacturing related product samples
Full range of automation products asA global leader in industrial automation,O-MRON Provide reliability for in ed in the...
Factory Automation Planning Automatic Vision Inspection and Sorting Device for Medical Parts Insection to Europe - Vision InspecMedical parts Size and Surface DefectsCCD Vision Inspection and Sorting Machine 1. AI software for size and surface defe...
Factory Automation Planning Advanced Aoi Vision Inspection Machine for Shaft Sleeve Quality Control - Aoi Inspection and Shaft SShaft sleeve visual screening machine This machine adopts vibration disc feeding, is equipped with artificial in Accordi...
Factory Automation Planning Smart Vision Inspection Machine for Quality Screw Analysis - Machine Tool Vision Inspection and SMTNut visual screening machine This machine adopts vibration disc feeding, equipped with artificial in According to custom...
Factory Automation Planning Smart Automated Storage Rack System for Efficient Warehouse Management - Rack System and Automated SAutomated Storage and Retrieval System AS/RS system is a cutting-edge genre of warehouse automation technology masterful...
Factory Automation Planning NSK, NACHI, Koyo, NTN, Timken Lightweight Rb20030 Ru124 Ru148 Ru178 High Rigidity Crossed Roller Bea: Engineered for high-load industrial automation, the RB12025 RB14025 RB15025 RB20030 series crossed roller bearings are...