Wellwit W5-300DL 300 kg Under-Drive Lifting AMR w | RFQ Sourcing Details

The W5-300DL is an under-drive lifting autonomous integrated lifting mechanism, and transports a maximum payload of 300 kg. The listed lifting height is 60 ±2 mm, with a lifting time of 8 ±0.5 seconds. Navigation is based on dual-LiDAR SLAM with inertial guidance for positioning correction.

Under the stated test conditions, navigation position accuracy is ±5 mm and navigation angle accuracy is ±1°. These figures refer to repeated arrival at a target from a fixed direction when the LiDAR-scanned environment remains relatively stable, with a stated environmental change rate below 30%.

They do not guarantee repeatability along the entire virtual travel path. The AMR uses double-wheel differential drive and has an adjustable operating speed of up to 1.5 m/s. Its 910 × 545 × 250 mm chassis includes a bumper strip and provides 30 mm ground clearance.

Listed passability limits are a slope of no more than 5%, a 5 mm step, and a 30 mm gap on smooth, clean surfaces without significant undulations. The robot is intended to cross such features quickly and perpendicularly rather than stop or turn on them.

A 51.2 V, 23 Ah lithium iron phosphate battery provides a stated endurance time of 8 hours. Charging from 10% to 80% is listed at no more than one hour. Manual and automatic charging configurations are available when paired with an appropriate charger.

The battery specification states 1,500 cycles while retaining more than 80% capacity. Fleet functions allow operators to view robot status, charge level, and location and to schedule multiple units through the robot control system.

Listed basic functions include map editing, model editing, positioning and navigation, a differential motion model, and an API interface.

Wi-Fi roaming, automatic charging, shelf recognition, and a basic safety function are included;QR-code precise positioning is optional, while tag-along operation is not listed as supported.

Safety equipment includes two LiDAR units, a safety laser scanning function, obstacle detection, a front bumper strip, emergency-stop controls, a speaker, and ambient lighting. The listed environmental range is 0–50°C and 10–90% relative humidity without condensation.

The enclosure rating is IP20, and the product is described as suitable for indoor transport rather than outdoor operation.

Before procurement, buyers should confirm the load-carrier geometry and lifting interface, required charger and docking arrangement, proposed routes and floor conditions, fleet size, control-system integration, wireless-network coverage, and whether QR-code positioning is needed.

Buyers should also request confirmation of the configuration-specific dimensions, weight, safety layout, CE documentation, acceptance-test method, packaging, and warranty scope for the ordered unit.