Customizable NP-PLC Low-Voltage Automation and Po | RFQ Sourcing Details

This NP-PLC low-voltage automation panel combines power distribution, circuit protection, and equipment control in a customizable cabinet. It is intended for industrial facilities, factories, buildings, and new-energy projects.

Supported functions include power and lighting distribution, equipment start-stop control, overload and short-circuit protection, and distribution scheduling. Supported configuration facts The panel is described as a fixed-board, all-packaged structure with a copper-bar busbar system.

Listed rated-voltage options are AC 380 V or 220 V at 50 Hz, while rated-current options are 100 A, 250 A, 400 A, 630 A, 800 A, 1250 A, and 2000 A. The rated insulation voltage is 660 V, and listed short-time withstand-current levels are 16 kA, 25 kA, 31.5 kA, and 50 kA.

Manual operation is supported, with electric operation available as an option. The internal arrangement may include circuit breakers, AC , thermal relays, air switches, terminal blocks, regulated power modules, instruments, indicator lights, control buttons, and relay modules.

Strong- and weak-current circuits are described as separa separation and overload and short-circuit protection are listed. Cabinet and installation options The enclosure is customizable, with listed protection grades from IP30 to IP66.

The basic specification gives cabinet material thickness as 1.5-2.0 mm, and the installation methods are floor-mounted or wall-mounted. The specified operating range is -10°C to +40°C at altitudes up to 2000 m. Product dimensions are customizable.

The listed packaged shipment size is 120 × 60 × 200 cm with a gross weight of 200 kg, but these shipping figures should be reconfirmed for the selected cabinet configuration.

Procurement questions to confirm Before ordering, provide the required single-line diagram or equivalent technical drawings and confirm the incoming supply, load schedule, rated current, fault-current requirement, protection scheme, control logic, PLC and component brands, enclosure material, IP grade, installation method, cable entry, internal separation, and expansion capacity.

Buyers should also confirm whether manual or electric operation is required and identify any site-specific temperature, altitude, corrosion, dust, or ventilation conditions.

The source lists ABB, Chint, Siemens, Omron, and Delixi among available brands, but the exact brand and model of every installed component should be agreed in the bill of materials.

ISO9001:2000, VDE, CCC, and CE are listed;buyers should request the applicable certificates and verify that they cover the exact ordered configuration and destination-market requirements.

Final drawings, dimensions, inspection criteria, packaging details, production schedule, and after-sales terms should be documented before purchase.