Low-Amine Resin Sand Production Line with Automat | RFQ Sourcing Details
Production Line Retrofit · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Production Line Retrofit. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This low-amine resin sand production line is designed to prepare chemically bonded no-bake sand for foundry moulding and core-making operations. The integrated process can include base-sand pretreatment, dynamic metering, high-speed mixing, cooling, screening, finished-sand conveying and centralized control.
It is offered as new, automatic equipment with a PLC and 10-inch HMI. The stated process capacity is 2–30 tons per hour, with continuous or batch operation available. Sand, resin and hardener are blended in a twin-shaft counter-flow or planetary high-speed mixer.
The stated mixing cycle is 15–45 seconds, with mixing homogeneity of at least 98%. Resin and hardener metering accuracy is stated as ±1%. Supported resin-system configurations include furan, alkaline phenolic, silicate and PU systems.
Downstream equipment can include a twin-disk or fluidized-bed cooler, multi-deck vibratory screening and belt, bucket-elevator or pneumatic conveying. Available configurations include standard, explosion-proof, stainless-steel and in ergy monitoring and MES connectivity.
Critical parts are listed with IP54 or IP65 protection, depending on configuration. Typical stated uses include no-bake sand preparation for steel and iron castings, resin-sand moulding for pumps, valves and housings, and integration with automated moulding lines or central sand-supply systems.
The modular line can be configured for new foundry installations, smart-factory upgrades or existing production-line retrofits. Buyer confirmation is essential before procurement.
Ask the manufacturer to define the exact included modules, model series, hourly capacity, resin chemistry, mixer type, control architecture and utilities for the proposed configuration.
Confirm whether the project requires explosion-proof equipment, stainless-steel , emissions controls, remote monitoring or MES integration. Obtain a project-specific layout because dimensions, total power and equipment weight vary by model and configuration.
Buyers should also verify incoming-sand requirements, finished-sand acceptance criteria, site foundations, installation scope, commissioning, operator training, spare parts, shipping arrangement and the precise coverage of the stated one-year warranty.
Low-Amine | Applications and Buyer Notes
Low-Amine is organized as a sourcing-ready Production Line Retrofit reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-tim
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Production Line RetrofitBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Warranty
- One yearBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Dimensions
- Customized by modelBased on visible page data; confirm exact value in the RFQ.
- Mixing time
- 15–45 secondsBased on visible page data; confirm exact value in the RFQ.
- Model series
- RS-2000 / RS-3000 / RS-5000 / RS-8000Based on visible page data; confirm exact value in the RFQ.
- Customization
- AvailableBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Mes Scada And Digital Manufacturing categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Smart Factory Integration categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Product CategoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 126inch Lathe Length 1100kn 110ton Pressure Dual Electric Hydraulic Sheet Bender MachineThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1mm Mm Metal Cutting Machine Laser Cutter Iron Cutter 1500w 3kwThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1500w Air Cooling Handheld Semi Auto Fiber Laser Welding Machine For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 24kv Metal Clad Common Tank Gas Insulated Switch CabinetThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 5 Ton Per Hour Complete Maize Milling Line Turnkey ProjectThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Abuk 2023 Ce Rohs Eu Uk Glass Board 86mm 1 2 3 4 Gang 300w Low Power Electronic Wall Touch Light SwiThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Smart Factory Integration categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2026 6 Axis Welding Robot Arm Collaborative Robotic Arm 3kg 5kg 10kg Welding Cobot Robot ArmThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path KnowledgeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path AboutThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Automatic Sand-Based AAC Block and Panel Production Line with Lifecycle ServicesRequest Quote
500 kg/Batch Shell Sand and Resin-Coated Sand Production LineRequest Quote
Automatic AAC Block and Panel Production Line with Retrofit SupportRequest Quote
Automatic AAC Block and Panel Production Line with Six Processing SectionsRequest Quote
Fully Automatic Toast and Bread Dough Production Line, 2,400–9,000 Pieces/HourRequest Quote
Automatic Belt Conveyor Tank for AAC Production Line Raw Material ProcessingRequest QuoteSmart Manufacturing related sourcing paths
Smart Manufacturing related product samples
Why Choose Us Industry sedimentation Ten years of experience in R&D, production and sales of vending machines, products ...
Production Line Retrofit Versatile Vending Machine for Snacks, Ice Cream, and Tennis BallsWhy Choose Us Industry sedimentation Ten years of experience in R&D, production and sales of vending machines, products ...
Production Line Retrofit Hot Sale Automatic 22 Inch Digital Touch Screen Hair and Beauty Product Vending Machine for ShoppingWhy Choose Us Industry sedimentation Ten years of experience in R&D, production and sales of vending machines, products ...
Production Line Retrofit Elevated Frozen Food Vending Kiosk with High Capacity StorageWhy Choose Us Industry sedimentation Ten years of experience in R&D, production and sales of vending machines, products ...
Production Line Retrofit Pipeline Inspection Endoscope with 23 mm Camera Lens 20 M Testing CablePipeline Inspection Video Endoscope with 23 mm Camera Lens 20 M Testing Cable Length Specifications: Specification camer...
Production Line Retrofit Innovative Retail Store Vending Unit with Bluetooth IntegrationWhy Choose Us Industry sedimentation Ten years of experience in R&D, production and sales of vending machines, products ...